Removal and Installation
1.
Remove the engine cover (A).
•
Lift up the lower end of engine cover, then left and right alternately.
•
When install ...
Removal
Engine Room Front Under Cover
1.
Remove the engine room front under cover (A).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
2.
Install in the reverse or ...
Other Information:
Room lamp
Type A
Type B
Press the button(1) or lens(1) to turn the light on or off.
If the front map lamp turns on by the front map lamp switch, the room lamp will
turn on. ...