Kia Sedona: Engine Mounting Components and Components Location - Engine And Transaxle Assembly - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Engine Mounting Components and Components Location

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Mechanical System / Engine And Transaxle Assembly / Engine Mounting Components and Components Location

Components

1.Engine mounting support bracket
2.Engine mounting bracket
3.Transaxle mounting bracket
4.Roll rod bracket


Engine Room Under Cover Repair procedures
Removal Engine Room Front Under Cover 1. Remove the engine room front under cover (A). Tightening torque : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) 2. Install in the reverse or ...

Engine Mounting Repair procedures
Removal and Installation Engine Mounting Bracket 1. Disconnect the battery negative terminal. 2. Install the jack to the edge of the lower oil pan (A) to support the engine. &n ...

Other Information:

Air bag
(1) Driver ...

Changing the coolant
Have the coolant changed by an authorized Kia dealer according to the Maintenance Schedule at the beginning of this chapter. Put a thick cloth around the radiator cap before refilling the coolant i ...

Categories


Copyright В© www.kisedona.com 2016-2024