Kia Sedona: Engine Coolant Temperature Sensor (ECTS) Specifications

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Engine Coolant Temperature Sensor (ECTS) Specifications

Intake Air Temperature Sensor (IATS) Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4. Check that the resistance is within the speci ...

Engine Coolant Temperature Sensor (ECTS) Description and Operation

Description Located in the engine coolant passage of the cylinder, the Engine Coolant Temperature Sensor (ECTS) is used to detect the engine coolant temperature. The ECTS uses a thermistor whos ...

Other Information:

Exhaust Manifold Repair procedures
Removal and Installation [LH Exhaust Manifold] 1. Disconnect the battery negative terminal. 2. Remove the engine cover. (Refer to Engine and Transaxle Assembly - "Engine Cover") 3. Remov ...

Inhibitor Switch Description and Operation
Description • The inhibitor switch is installed on top of transaxle, and is connected to the shift lever through shift cable. • Inhibitor switch signals (S1, S2, S3, S4) are t ...