Removal and Installation |
1. |
Remove the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle") |
2. |
Remove the adapter plate (A) and the drive plate (B).
|
3. |
Install in the reverse order of removal. |
Repair procedures
Inspection
Special care is needed for the following points in case of working with the non-gloss timber trimming.
•
Wrap a protective tape around tools used ...
Specifications
Specifications
Automatic Transaxle
ItemSpecificationTransaxle modelA6LF2Engine modelGasoline 3.3 GDITorque converter type3-element, 1-stage, 2-phase typeTorque converter sizeØ260mm (10.2362 in. ...