Kia Optima Manuals

Kia Sedona: Drive Belt Tensioner Repair procedures - Timing System - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Drive Belt Tensioner Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Mechanical System / Timing System / Drive Belt Tensioner Repair procedures

Removal and Installation
1.
Remove the drive belt idler.
(Refer to Timing System - "Idler")
2.
Remove the drive belt auto tensioner (A).
Tightening torque
Bolt (B) :
81.4 ~ 85.3 N.m (8.3 ~ 8.7 kgf.m, 60.0 ~ 62.9 lb-ft)
Bolt (C) :
17.7 ~ 21.6 N.m (1.8 ~ 2.2 kgf.m, 13.0 ~ 15.9 lb-ft)

3.
Install in the reverse order of removal.
Inspection
Check the belt tensioner for excessive dust, crack, and damage. Replace if necessary.
Drive Belt Tensioner Components and Components Location
Components 1. Drive belt tensioner ...

Crankshaft Damper Pulley Components and Components Location
Components 1. Crankshaft damper pulley ...

Other Information:

To turn cruise control off, do one of the following
Press the CRUISE button (the CRUISE indicator light in the instrument cluster will go off). Turn the ignition off. Both of these actions will cancel the cruise control operation. If you w ...

AC Inverter Outlet Repair procedures
Removal [Outlet 1 - Console] 1. Disconnect the negative (-) battery terminal. 2. Remove the rear console cover. (Refer to Body - "Rear Console Cover") 3. Remove the floor console tray (A ...

Categories


Copyright В© www.kisedona.com 2016-2024