Inspection |
1. |
Check belt for maintenance and V-ripped part for abnormal wear. Replace if necessary.
|
2. |
Visually check the belt for excessive wear, frayed cords etc.
If any defect has been found, replace the drive belt.
|
Removal and Installation |
1. |
Remove the engine room under cover and engine room RH side cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover") |
2. |
To release the tension, turn the drive belt tensioner counterclockwise and then remove the drive belt (A).
[HPS]
[MDPS]
|
3. |
Install in the reverse order of removal. |
48,000 km (30,000 miles) or 24 months
❑ Rotate tire
❑ Inspect battery condition
❑ Inspect vacuum hose
❑ Inspect air conditioning refrigerant
❑ Inspect brake hoses and lines
❑ Inspect drive sh ...
Description and Operation
Description
An inverter is a device that transforms the DC voltage from
the battery into an AC voltage (115V). The inverter can power various
electrical devices that consume 150W or less, inclu ...