Description |
1. |
Do not place other devices on top of this device. |
2. |
Be sure to switch to manual during poor visibility climate, such as fog, heavy rain, or cloudy weather. |
3. |
Illumination intensity in an actual vehicle is not always
constant, and lamp ON/OFF time may vary depending on the climate,
season, and surrounding environment. |
4. |
Use this system only during sunrise and sunset period, and manually control lamp ON/OFF for general conditions. |
5. |
Error may occur if light block coating that may change interior illumination is applied. |
Surround View Monitoring Switch Repair procedures
Removal
Floor Console Switch
1.
Disconnect the negative (-) battery terminal.
2.
Remove the floor console upper cover.
(Refer to Body - "Floor Console Assembly")
3.
Disconnect the floor ...
Transaxle Control Module (TCM) Repair procedures
Inspection
1.
TCM ground circuit test: Measure resistance between TCM and
chassis ground using the backside of TCM harness connector as TCM side check point.
Specification: Below 1Ω
...