Kia Sedona: Curtain Airbag (CAB) Module Repair procedures
Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Restraint / Airbag Module / Curtain Airbag (CAB) Module Repair procedures
| Removal |
| 1. |
Disconnect the battery negative cable and wait for at least 30 seconds before beginning to work. |
| 2. |
Remove the roof trim.
(Refer to Body - "Roof trim assembly") |
| 3. |
Disconnect the curtain airbag harness connector (A).
|
| 4. |
After loosening the mounting bolts and nuts remove the curtain airbag.
|
| Installation |
| 1. |
Remove the ignition key from the vehicle. |
| 2. |
Disconnect the battery negative cable and wait for at least thirty seconds. |
| 3. |
Tighten the curtain airbag mounting bolts and nuts.
|
| 4. |
Connect the curtain airbag connector. |
| 5. |
Install the roof trim.
(Refer to Body - "Roof trim assembly") |
| 6. |
Reconnect the battery negative cable. |
| 7. |
After installing the curtain airbag (CAB), confirm proper system operation:
|
Airbag Module Disposal Description and Operation
Airbag Disposal
Special tool required
Deployment tool 0957A-34100A
Before scrapping any airbags or side airbags (including those
in a whole vehicle to be scrapped), the airbags or side airba ...
Other Information:
Seat Heater Repair procedures
Inspection
First Row Seat Heater
1.
Check for continuity and measure the resistance between terminals No 3 and No 6.
Standard value
Driver / Assists (cushion) : 3.23Ω±10%
Driver / Assist ...
Front Wheel Speed Sensor Repair procedures
Removal
1.
Remove the front wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the front wheel speed sensor mounting bolt (A).
Tighten ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2024 Owners Manual
- Kia Sedona YP 2014-2024 Service Manual
Copyright © www.kisedona.com 2016-2024