Replacement |
Put on gloves to protect your hands. |
|
1. |
Remove the floor console assembly.
(Refer to Floor Console - "Floor Console Assembly") |
2. |
Remove the center fascia panel.
(Refer to Crash Pad - "Center Fascia Panel") |
3. |
Remove the crash pad lower panel.
(Refer to Crash Pad - "Crash Pad Lower Panel") |
4. |
Remove the glove box housing.
(Refer to Crash Pad - "Glove Box Housing") |
5. |
After loosening the mounting screws, remove the crash pad center lower panel (A). |
6. |
Install in the reverse order of removal.
|
Heating
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desi ...
Electronic Stability Control (ESC) Indicator Light
This indicator light illuminates :
Once you set the ignition switch or Engine Start/Stop Button to the ON position.
- It illuminates for approximately 3 seconds and then goes off.
When there ...