Inspection |
1. |
Check the signal waveform of the CMPS and CKPS using the GDS.
|
Removal |
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) terminal. |
2. |
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner") |
3. |
Remove the battery tray.
(Refer to Engine Electrical System - "battery") |
4. |
Disconnect the crankshaft position sensor connector (A). |
5. |
Remove the mounting bolt (B), and then vertically remove the sensor from the transaxle housing. |
Installation |
|
1. |
Install in the reverse order of removal.
|
SCC/LDWS Mode
This mode displays the state of the Smart Cruise Control (SCC) and Lane Departure
Warning System (LDWS).
For more information, refer to "Smart Cruise Control (SCC)" and "Lane Depar ...
Air conditioning
Kia Air Conditioning Systems are filled with refrigerant*.
1. Start the engine. Push the air conditioning button.
2. Set the mode to the position.
3. Set the air intake control to the outside air ...