Kia Sedona: Crankshaft Position Sensor (CKPS) Description and Operation - Engine Control System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: Crankshaft Position Sensor (CKPS) Description and Operation

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Crankshaft Position Sensor (CKPS) Description and Operation

Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system.
If there is no CKPS signal input, the engine may stop due to lack of fuel supply and relay inoperation.
This sensor is installed on the cylinder block or the transaxle housing and generates alternating current by magnetic flux field which is made by the sensor and the target wheel when engine runs.
The target wheel consists of 58 slots and 2 empty slots on 360 degrees CA (Crank Angle).

Crankshaft Position Sensor (CKPS) Specifications
Specification ItemSpecificationCoil Resistance (Ω)500 ~ 620 [20°C(68°F)] ...

Crankshaft Position Sensor (CKPS) Schematic Diagrams
Circuit Diagram ...

Other Information:

Side Impact Sensor (SIS) Repair procedures
Removal Pressure Side Impact Sensor (P-SIS)     • Removal of the airbag must be performed according to the precautions/procedures described previously. • ...

Leg support (2nd row seat for SXL package)
To use the leg support : 1. Pull the leg support lever up and hold it. 2. Adjust the angle and length of the leg support while holding the leg support. When using the leg rest, move the seat to ...

Categories


Copyright © www.kisedona.com 2016-2024