Components |
1) SVM unit basically uses C-CAN signal only to communicate about the vehicle''s condition.
2) Other unit''s B-CAN, P-CAN, and MM-CAN signals are changed to C-CAN signal and sent to SVM unit by CGW (Central Gate Way).
|
No. | Components | Quantity | Major Role | ||||||
1 | SVM Unit | 1 |
| ||||||
2 | Ultra optical camera (190 degrees) | 4 |
| ||||||
3 | AVN Head Unit | 1 |
| ||||||
4 | SVM Switch | 1 |
|
Closing the hood
1. Before closing the hood, check the following:
All filler caps in the engine compartment must be correctly installed.
Gloves, rags or any other combustible material must be removed from the
...
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Disconnect the solenoid valve connector (A).
4.
Me ...