Inspection |
1. |
Press the MODE switch more than 4 times within 2 seconds while pressing the OFF switch.
* For diagnostic procedure, refer to DTC guide. |
Replacement |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the glove box housing.
(Refer to Body - "Glove Box Housing") |
3. |
Disconnect the cluster ionizer connector (A). |
4. |
Remove the cluster ionizer (B) after loosening the screw. |
5. |
Install in the reverse order of removal. |
Components and Components Location
Components
1. Drive belt (with HPS)2. Drive belt (with MDPS)3. Drive belt tensioner4. Idler5. Crankshaft damper pulley6. Water pump pulley
1. Timing chain cover2. Oil pump chain cover3. Oil ...
Engine Coolant Temperature Gauge
This gauge indicates the temperature of the engine coolant when the ignition
switch or Engine Start/Stop button is ON.
If the gauge pointer moves beyond the normal range area toward the ...