Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly") |
3. |
Remove the front seat outer shield cover.
(Refer to Body - "Front Seat Outer Shield Cover") |
4. |
Separate the front seat track (B) after loosening the bolts (A). |
5. |
Disconnect the ventilation seat back duct (A) and ventilation seat cushion duct (B) after pushing the clips. |
6. |
Disconnect the connector (A) and then remove the blower fan (B) after loosening the screws. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front seat assembly [RH].
(Refer to Body - "Front Seat Assembly") |
3. |
Loosen the ventilation seat unit mounting screws (A). |
4. |
Remove the ventilation seat unit (B) after disconnecting the connectors (A). |
Installation |
1. |
Disconnect the connector after installing the blower fan. |
2. |
Install the ventilation seat back duct and ventilation seat cushion duct. |
3. |
Install the front seat track. |
4. |
Install the front seat outer shield cover. |
5. |
Install the front seat assembly. |
6. |
Connect the negative (-) battery terminal. |
1. |
Connect the ventilation seat unit connector. |
2. |
Install the ventilation seat. |
3. |
Install the front seat assembly [RH]. |
4. |
Connect the negative (-) battery terminal. |
Surge Tank Repair procedures
Removal and Installation
1.
Remove the engine cover.
(Refer to Engine and Transaxle Assembly - "Engine Cover")
2.
Remove the air duct.
(Refer to Intake And Exhaust System - "Air Cleaner")
...
Timing Chain Cover Repair procedures
Removal
When removing the high pressure fuel pump, high pressure fuel
pipe, delivery pipe, and injector, there may be injury caused by
leakage of high pressure fuel ...