Removal |
1. |
Disconnect the brake fiuid level switch connector, and remove the reservoir cap. |
2. |
Remove the brake fluid from the master cylinder reservior with a syringe.
|
3. |
Remove the wheel & tire. |
4. |
Disconnect the brake tube by loosening the tube flare nut (B).
Front
Rear |
5. |
Remove the brake hose clip (A). |
6. |
Disconnect the brake hose from the brake caliper by loosening the bolt (C).
Front
Rear |
Inspection |
1. |
Check the brake tubes for cracks, crimps and corrosion. |
2. |
Check the brake hoses for cracks, damage and fluid leakage. |
3. |
Check the brake tube flare nuts for damage and fluid leakage. |
4. |
Check brake hose mounting bracket for crack or deformation. |
Installation |
1. |
Install in the reverse order of removal.
|
2. |
After installation, bleed the brake system.
(Refer to Brake system - "Brake system Bleeding") |
3. |
Check for spilled brake fluid. |
Front side marker
1. Open the hood.
2. Remove the front cover(1) and headlamp assembly nuts(2).
3. Remove the headlamp assembly from the body of the vehicle
4. Remove the socket from the assembly by turning the so ...
Components and Components Location
Component Location
1. Fender assembly
...