Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel") |
3. |
Remove the crash pad lower switch (A) after loosening the mounting screws. |
4. |
Disconnect the connector (A) from the crash pad lower switch. |
Installation |
1. |
Connect the crash pad lower switch connector. |
2. |
Install the crash pad lower switch and crash pad lower panel. |
3. |
Connect the negative (-) battery terminal. |
Inspection |
1. |
Disconnect the BSD switch connector from the crash pad lower switch assembly. |
2. |
Operate the BSD switch, then check for continuity between terminals BSD switch connector. |
Sunroof Guide Repair procedures
Replacement
[Front]
1.
Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly")
2.
Remove the sunroof glass.
(Refer to Sunroof - "Sunroof Glass ")
3.
Remove the sunroof mo ...
Emergency Fastening Device (EFD) Description and Operation
Description
Emergency Fastening Device (EFD) is deployed concurrently
with the Belt Pretensioner to strongly pull down the seat belt during a
deployment condition after a collision. It is locat ...