Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the console upper cover (A).
(Refer to Body - "Floor Console Assembly") |
3. |
Disconnect the multimedia jack connector (A) and multi switch connector (B). |
4. |
Remove the multimedia jack (A) after releasing the fixed hooks. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear console assembly.
(Refer to Body - "Floor Console Assembly") |
3. |
Disconnect the USB charger connector (A). |
4. |
Remove the USB charger (A) after releasing the fixed hooks. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear console cover.
(Refer to Body - "Rear Console Cover") |
3. |
Remove the floor console tray (A) after loosening the screws. |
4. |
Remove the rear console switch panel (A) after loosening the screws. |
5. |
Remove the usb charger (A) after releasing the fixed hooks. |
Installation |
1. |
Install the multimedia jcak. |
2. |
Connect the console upper cover connector. |
3. |
Install the console upper cover. |
4. |
Connect the negative (-) battery terminal. |
1. |
Install the USB charger. |
2. |
Connect the USB charger connector. |
3. |
Install the rear console assembly. |
4. |
Connect the negative (-) battery terminal. |
1. |
Install the USB charger. |
2. |
Install the rear console switch panel. |
3. |
Install the floor console tray. |
4. |
Connect the USB charger connector. |
5. |
Install the rear console cover. |
6. |
Connect the negative (-) battery terminal. |
Glove Box Housing Repair procedures
Replacement
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and ...
Steering wheel remote controller
(1) VOLUME
Used to control volume.
(2) SEEK
When pressed briefly (less than 1 second).
- FM, AM mode : searches broadcast frequencies saved to presets.
- CD, USB, iPod ...