Inspection |
1. |
Ignition "ON". |
2. |
Turn on the head lamp switch. |
3. |
Check for operation. If the aim of the head lamps changes smoothly when the head lamp leveling switch is turned. |
4. |
If the operation does not work well, inspect the connector and terminals to be sure they are all making good contact.
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
If the terminals look OK, go to step 5. |
5. |
Substitute with a known-good head lamp assembly and check for proper operation. |
Removal |
1. |
Remove the head lamp leveling unit connector (A). |
2. |
Remove the head lamp leveling unit (B) after loosening the mounting bolts.
|
Installation |
1. |
Install the head lamp leveling unit. |
2. |
Connect the head lamp leveling unit connector. |
Camshaft Position Sensor (CMPS) Schematic Diagrams
Circuit Diagram
...
IMS Control Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Install the driver''s door trim.
(Refer to Body - "Front Door Trim")
3.
Remove the IMS switch (A) after loosening the screws.
...