Kia Sedona: Auto Defogging Sensor (DATC only) Description and Operation
Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / Auto Defogging Sensor (DATC only) Description and Operation
| Description |
The auto defogging sensor is installed on the front window
glass. The sensor judges and sends signal to blow out wind for defogging
if moisture occurs. On receiving the signal from the sensor, the air
conditioner control module restrains moisture and eliminates fog by
controlling the intake actuator, A/C, auto defogging actuator, blower
motor rpm, and mode actuator.
Ambient Temperature Sensor Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the front bumper.
(Refer to Body - "Front Bumper Cover")
3.
Disconnect ambient temperature sensor.
4.
Check the resistance of the ...
Auto Defogging Sensor (DATC only) Repair procedures
Inspection
To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC guide.
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the auto defogging se ...
Other Information:
Components and Components Location
Components
1. Console armrest met 2. Shift lever boots assembly3. Console upper cover4. Rear console assembly5. Floor console rear mounting bracket6. Front console assembly
...
Injector Specifications
Specification
ItemSpecificationCoil Resistance (Ω)0.98 ~ 1.14 [20°C(68°F)]
...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2024 Owners Manual
- Kia Sedona YP 2014-2024 Service Manual
Copyright © www.kisedona.com 2016-2024