Kia Sedona: Anti-Pinch Strip Repair procedures - Smart Tailgate System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Anti-Pinch Strip Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body Electrical System / Smart Tailgate System / Anti-Pinch Strip Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the tail gate trim.
(Refer to Body - "Tail Gate Trim")
3.
Disconnect the anti-pinch strip sensor connector (A).

4.
Remove the anti-pinch strip (A) after disconnecting the mounting clip.

Installation
1.
Install the smart tailgate anti-pinch strip.
2.
Disconnect the smart tailgate anti-pinch strip sensor connector.
3.
Install the tail gate trim.
4.
Connect the negative (-) battery terminal.
Smart Tailgate Latch Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the tail gate trim. (Refer to Body - "Tail Gate Trim") 3. Disconnect the smart tailgate latch and PCU assembly connector ...

STG Spindle Repair procedures
Removal [LH] 1. Disconnect the negative (-) battery terminal. 2. Remove the tail gate trim [LH]. (Refer to Body - "Tail Gate Trim") 3. Disconnect the STG spindle connector (A). 4. Us ...

Other Information:

Fuel Economy
Type A Type B, C ...

Rear Console Cover Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

Categories


Copyright © www.kisedona.com 2016-2024