Inspection |
1. |
Remove the antenna jack from the audio unit and antenna. |
2. |
Check for continuity between the center poles of antenna cable. |
3. |
Check for continuity between the outer poles of antenna cable. There should be continuity. |
4. |
If there is no continuity, replace the antenna cable. |
5. |
Check for continuity between the center pole (A) and outer pole (B) of antenna cable. There should be no continuity. |
6. |
If there is continuity, replace the antenna cable. |
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear roof trim.
(Refer to Body - "Roof Trim Assembly") |
3. |
Disconnect the roof antenna connector (A). |
4. |
Remove the roof antenna (A) after loosening a nut (B). |
Installation |
1. |
Install the roof antenna. |
2. |
Connect the roof antenna connectors. |
3. |
Install the roof trim assembly.
|
Blade inspection
Commercial hot waxes applied by automatic vehicle washes have been known to make
the windshield difficult to clean.
Contamination of either the windshield or the wiper blades with foreign matter ...
Floor Console Assembly Components and Components Location
Component Location
1. Floor console assembly
...