Kia Sedona: Alternator Schematic Diagrams - Charging System - Engine Electrical System - Kia Sedona YP Service ManualKia Sedona: Alternator Schematic Diagrams

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Electrical System / Charging System / Alternator Schematic Diagrams

Circuit Diagram

   
•
COM signal - When controlling the voltage generated, the ECM sends the target voltage data to the alternator via a PWM signal (High voltage: 4V or higher, low voltage: 2V or lower).
•
FR signal - The transistor activation signal inside the alternator monitors the voltage generated by the alternator to control the current spike before it sends the FR signal to the ECM. (At certainRPM/electric loads, the FR duty can remain static. However, more often, the RPM, electric load, target voltage, etc. are always changing in the vehicle, so the FR must also change constantly.)
•
L signal - Turns on the battery warning lamp on the dashboard when the battery charging system malfunctions. (Conditions for turning on the lamp - overcharge, over discharge, a field coil blown inside the alternator.)
•
B+ terminal - The output voltage from the generator travels to the battery via the B+ terminal.
Alternator Description and Operation
Description The Alternator has eight built-in diodes, each rectifying AC current to DC current. Therefore, DC current appears at alternator "B" terminal. In addition, the charging voltage of this ...

Alternator Repair procedures
Removal 1. Disconnect the battery negative (-) terminal. 2. Remove the cooling fan. (Refer to Engine Mechanical System - "Cooling Fan") 3. Lift the vehicle. 4. Remove the engine room ...

Other Information:

Schematic Diagrams
Trouble Symptom Charts Component Parts And Function Outline Component partFunctionCruise Control SwitchInput the set speed and distance to the SCC ECU.Instrument ClusterDisplay various informati ...

Engine Room Under Cover Repair procedures
Removal Engine Room Front Under Cover 1. Remove the engine room front under cover (A). Tightening torque : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) 2. Install in the reverse or ...

Categories


Copyright © www.kisedona.com 2016-2024