Removal |
1. |
Disconnect the battery negative (-) terminal. |
2. |
Remove the cooling fan.
(Refer to Engine Mechanical System - "Cooling Fan") |
3. |
Lift the vehicle. |
4. |
Remove the engine room RH side cover.
(Refer to Engine Mechanical System - Engine Room Under Cover - Repair procedures - "Engine Room Side Cover") |
5. |
To release the auto tension pully (A), turn the drive belt tensioner counterclockwise. |
6. |
Remove the drive belt (A). |
7. |
Disconnect the alternator connector (A). |
8. |
Disconnect the alternator cable (A) from the ''B'' terminal.
|
9. |
Remove the alternator (B) after loosening the mounting bolts (A).
|
Installation |
1. |
Install in the reverse order of removal. |
2. |
Install the drive belt.
(Refer to Engine Mechanical System - "Drive Belt") |
CVVT Oil Temperature Sensor (OTS) Specifications
Specification
TemperatureResistance (kΩ)Output Voltage (V) [Ref=5V]°C°F-40-4052.154.82-20-416.524.38 ~ 4.530326.03.7520682.452.60 ~ 2.91401041.111.78601400.541.06801760.290.58 ~ 0.691002120.1 ...
Passenger Airbag (PAB) Module Description and Operation
Description
Passenger Airbag (PAB) module is located in the passenger
crash pad. The PAB contains 2 firing squibs of airbag and 1 firing squib
of active vent. The deployment timing of both 2 fi ...