Kia Sedona: Accelerator Position Sensor (APS) Specifications - Engine Control System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: Accelerator Position Sensor (APS) Specifications

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Accelerator Position Sensor (APS) Specifications

Specification
Accelerator
Position
Output Voltage (V) [Ref=5V]
APS1
APS2
C.T
0.7 ~ 0.8
0.29 ~ 0.46
W.O.T
3.85 ~ 4.35
1.93 ~ 2.18

CVVT Oil Temperature Sensor (OTS) Repair procedures
Inspection [Resistance Inspection] 1. Turn the ignition switch OFF. 2. Remove the OTS. (Refer to "Removal") 3. After immersing the thermistor of the sensor into engine coolant, measure ...

Accelerator Position Sensor (APS) Description and Operation
Description Accelerator Position Sensor (APS), installed on the accelerator pedal module, detects the rotation angle of the accelerator pedal. The APS, one of the most important sensors in engi ...

Other Information:

Occupant Detection System(ODS)
Type A Type B Your vehicle is equipped with an occupant detection system in the front passenger's seat. The occupant detection system is designed to detect the presence of a properly-seat ...

Troubleshooting
Troubleshooting     • The battery must be in good condition and fully charged for this troubleshooting. ...

Categories


Copyright В© www.kisedona.com 2016-2024