Kia Sedona: Accelerator Position Sensor (APS) Repair procedures
Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Accelerator Position Sensor (APS) Repair procedures
| Inspection |
| 1. |
Connect the GDS on the Data Link Connector (DLC). |
| 2. |
Turn the ignition switch ON. |
| 3. |
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
| |||||||||||
| Removal |
| 1. |
Turn the ignition switch OFF and disconnect the negative (-) battery terminal. |
| 2. |
Disconnect the accelerator position sensor connector (A). |
| 3. |
Remove the installation nuts (B) and then remove the accelerator pedal module.
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
Accelerator Position Sensor (APS) Schematic Diagrams
Circuit Diagram
...
Fuel Tank Pressure Sensor (FTPS) Specifications
Specification
ItemSpecificationSupply Voltage (V)5Operation Voltage (V)4.75 ~ 5.25
Pressure [kPa (kgf/cmВІ, psi)]Output Voltage (V) [Ref=5V]-6.67 (-0.06, -0.97)0.502.5+6.67 (0.068, 0.97)4.5
...
Other Information:
To turn cruise control off, do one of the following
Press the CRUISE button (the CRUISE indicator light in the instrument cluster
will go off).
Turn the ignition off.
Both of these actions will cancel the cruise control operation. If you w ...
Rear Seat Belt Buckle Components and Components Location
Component Location
[Second row seat belt buckle]
1. Second row seat belt buckle2. Second row center seat belt buckle
[Third row seat belt buckle]
1. Third row seat belt buckle
...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2024 Owners Manual
- Kia Sedona YP 2014-2024 Service Manual
Copyright В© www.kisedona.com 2016-2024