To fasten the rear center belt
1. Pull out the mini tongue from hole on the belt assembly cover (1) and then slowly pull the seat belt out from the retractor.
2. Pull out the tongue plate from the holder on the seat belt (2).
3. Insert the mini tongue (A) into the open end of the anchor connector (C) until an audible
Rear Temperature Control Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the temperature control actuator connector.
3.
Verify that the actuator operates to the recirculation position when 12V is connect ...
Road warning
Type A
Type B
The hazard warning flasher serves as a warning to other drivers to exercise extreme
caution when approaching, overtaking, or passing your vehicle.
It should be used whenever eme ...