Kia Sedona: 26 Brake Control Solenoid Valve(26/B_VFS) Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sedona YP Service ManualKia Sedona: 26 Brake Control Solenoid Valve(26/B_VFS) Specifications

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) Specifications

Specification
Item
Specification
Control type
N/L (Normal Low)
Control pressure kpa(kgf/cm², psi)
"9.81 ~ 500.14(0.1 ~ 5.1, 1.42 ~ 72.54)"
Current value (mA)
50 ~ 850
Coil resistance(Ω)
5.1 ± 0.3

35R Clutch Control Solenoid Valve(35R/C_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. Me ...

26 Brake Control Solenoid Valve(26/B_VFS) Components and Components Location
Component Location 1. 26 Brake control solenoid valve (26/B_VFS) ...

Other Information:

Reverse parking aid function
While the vehicle is moving rearward, the outside rearview mirror(s) will move downward to aid reverse parking. According to the position of the outside rearview mirror switch (1), the outside r ...

Yaw-rate and G Sensor Description and Operation
Description The yaw rate and G sensor is included inside the air bag control module (SRSCM). When the vehicle is turning with respect to a vertical axis the yaw rate sensor detects the yaw rate ...

Categories


Copyright © www.kisedona.com 2016-2024