Inspection |
1. |
Remove the cowl top cover.
(Refer to Body - "Cowl Top Cover") |
2. |
Disconnect the windshield deicer connector (A). |
3. |
Check for continuity between the terminals of deicer lines. |
4. |
Turn the ignition switch ON and the windshield deicer switch
ON, then measure the voltage between the terminals of harness side
deicer connector.
|
Rear window wiper blade
1. Raise the wiper arm and pull out the wiper blade assembly.
2. Install the new blade assembly by inserting the center part into the slot
in the wiper arm until it clicks into place.
3. Make ...
Tail Gate Lift Repair procedures
Replacement
Take care to not let the tailgate fall on you as the lifts
are removed. Have a helper hold the tailgate open, or use a secure
method to hold it open.
...