Specifications |
Item | Specification | |
Type | Motor Driven Power Steering | |
Hydraulic Power Steering System | ||
Steering gear | Type | Rack & Pinion |
Rack stroke | 168mm | |
Steering angle(Max.) | Inner | 41.91° |
Outer | 32.84° | |
Power steering pump | Type | Vane |
Relief pressure | 100 ~ 105 kgf/cm² (1422 ~ 1493 psi) | |
Power steering oil | PSF-3 or PSF-4 (Power Steering Fluid, MS517-16) |
Item | Tightening torque (kgf.m) | ||
Nm | kgf.m | lb-ft | |
Tire wheel hub nuts | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 |
Steering wheel lock nut | 39.2 ~ 49.0 | 4.0 ~ 5.0 | 28.9 ~ 36.2 |
Steering column assembly to Universal joint | 49.0 ~ 58.8 | 5.0 ~ 6.0 | 36.2 ~ 43.4 |
Steering column mounting bolts | 44.1 ~ 49.0 | 4.5 ~ 5.0 | 32.5 ~ 36.2 |
Steering column mounting nuts | 24.5 ~ 29.4 | 2.5 ~ 3.0 | 18.1 ~ 21.7 |
Universal joint to gear box | 32.4 ~ 37.3 | 3.3 ~ 3.8 | 23.9 ~ 27.5 |
Steering gear box to sub freame | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 |
Heat protector nut and bolt | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 |
Pressure hose bracket bolt | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 |
Gear box fit tube | 11.8 ~ 17.7 | 1.2 ~ 1.8 | 8.7 ~ 13.0 |
Pressure hose | 53.9 ~ 63.7 | 5.5 ~ 6.5 | 39.8 ~ 47.0 |
Checking the engine oil level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil
...
Heated Oxygen Sensor (HO2S) Specifications
Specification
[Bank 1/Sensor 1]
ItemSpecificationHeater Resistance (Ω)3.3 ~ 4.1[20°C(68°F)]
[Bank 1/Sensor 2]
ItemSpecificationHeater Resistance (Ω)3.3 ~ 4.1[20°C(68°F)]
[Ba ...