Kia Sedona: Fuel Pressure Control Valve (FPCV) Specifications - Engine Control System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: Fuel Pressure Control Valve (FPCV) Specifications

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Fuel Pressure Control Valve (FPCV) Specifications

Specification
Item
Specification
Coil Resistance (Ω)
1.04 ~ 1.27 [23°C(73.4°F)]

Variable Intake Solenoid (VIS) Valve Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between the VIS valve terminals 1 and 2. 4. Check that the resistance is within ...

Fuel Pressure Control Valve (FPCV) Description and Operation
Description Fuel Pressure Control Valve, installed on the high pressure fuel pump, controls fuel flow into the injectors in accordance with the ECM signal calculated based on various engine con ...

Other Information:

To increase cruise control set speed
Follow either of these procedures: Move the lever up (to RES+), and hold it. Your vehicle set speed will increase by 10 km/h (5 mph). Release the lever at the speed you want. Move the lever ...

Front Driveshaft Components and Components Location
Components 1. Front driveshaft (LH)2. Inner shaft bearing bracket3. Front driveshaft (RH) [LH] 1. BJ assembly2. Clip 3. BJ boot band4. BJ boot5. Dynamic damper band6. Dynamic damper7. Sha ...

Categories


Copyright © www.kisedona.com 2016-2025