Kia Sedona: Components and Components Location - Cylinder Head Assembly - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Components and Components Location

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Mechanical System / Cylinder Head Assembly / Components and Components Location

Components

1. RH Cylinder head
2. RH Cylinder head gasket
3. LH Cylinder head
4. LH Cylinder head gasket
5. Cylinder block

1. Camshaft bearing cap
2. Camshaft thrust bearing cap
3. RH Exhaust camshaft
4. RH Intake camshaft
5. RH Exhaust CVVT assembly
6. RH Intake CVVT assembly
7. Mechanical lash adjuster (MLA)
8. Retainer lock
9. Retainer
10. Valve spring
11. Valve stem seal
12. Valve
13. RH Intake camshaft OCV
14. RH Exhaust camshaft OCV
15. RH Cylinder head
16. LH Exhaust camshaft OCV

17. LH Intake camshaft OCV
18. Fuel pump bracket
19. LH Intake camshaft
20. LH Exhaust camshaft
21. LH Intake CVVT assembly
22. LH Intake CVVT assembly
23. LH Cylinder head

Cylinder Head Assembly
...

Valve Clearance Adjustment
Valve Clearance Inspection and Adjustment     Inspect and adjust the valve clearance when the engine is cold (Engine coolant temperature : 20°C [68°F]) and cylinder hea ...

Other Information:

Ignition Coil Repair procedures
Removal Ignition coil (Cylinder #1) [Bank 1] 1. Remove the surge tank. (Refer to Engine Mechanical System - "Surge Tank") 2. Disconnect the Ignition coil connector (A). 3. Remove the i ...

Reservoir Tank Repair procedures
Removal and Installation 1. Disconnect the over flow hose (A), and then drain the coolant from the reservoir tank. 2. Remove the reservoir tank (B). Tightening torque : 7.8 ~ 11.8 N.m (0.8 ...

Categories


Copyright © www.kisedona.com 2016-2024