Kia Sedona: SRS components and functions
The SRS consists of the following components :
(1) Driver's front air bag module
(2) Passenger's front air bag module
(3) Side air bag modules
(4) Curtain air bag modules
(5) Retractor pre-tensioner assemblies
(6) Air bag warning light
(7) SRS control module (SRSCM)/ Rollover sensor
(8) Front impact sensors
(9) Side impact sensors
(10) PASSENGER
Air bag warning light
The purpose of air bag warning light in your instrument panel is to alert you
of a potential problem with your air bag system, which could include your side and/or
curtain air bags used for roll ...
Occupant Detection System(ODS)
Type A
Type B
Your vehicle is equipped with an occupant detection system in the front passenger's
seat.
The occupant detection system is designed to detect the presence of a properly-seat ...
Other Information:
Rear Wheel Speed Sensor Repair procedures
Removal
1.
Remove the rear wheel speed sensor connector (A).
2.
Remove the rear wheel speed sensor.
(Refer to Driveshaft and Axle - "Rear Hub - Carrier")
3.
Install in the reverse order o ...
Speaker Repair procedures
Inspection
1.
Troubleshooting for Speaker
(1)
Basic inspection of speaker
Inspect the sound from speaker after verifying that the
speaker mounting screws are removed and the wiring connector ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2024 Owners Manual
- Kia Sedona YP 2014-2024 Service Manual