Kia Sedona: Parking Brake Repair procedures - Chassis - Maintenance - Kia Sedona YP Service ManualKia Sedona: Parking Brake Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Maintenance / Chassis / Parking Brake Repair procedures

Inspection
Check whether the stroke is within specification when the parking brake pedal is depressed with 66 lb, 294 N(30 kg) of force. Also, the parking brake alone should securely hold the vehicle on a fairly steep grade. If the stroke is more or less than specified, have the parking brake adjusted by an authorized Kia dealer.

Stroke : 8~9 notch

Drive Shafts and Boots Repair procedures
Inspection 1. Check the drive shaft boots for loose clamps, cracks, grease leaks, kinks or damage. ...

Power Steering Fluid Repair procedures
Inspection Check that the power steering fluid is filled up to the level of MAX level mark on the reservoir. ...

Other Information:

ON
Redish orange Press the ENGINE START/STOP button while it is in the ACC position without depressing the brake pedal. The warning lights can be checked before the engine is started. Do not leave ...

CVVT Oil Temperature Sensor (OTS) Repair procedures
Inspection [Resistance Inspection] 1. Turn the ignition switch OFF. 2. Remove the OTS. (Refer to "Removal") 3. After immersing the thermistor of the sensor into engine coolant, measure ...

Categories


Copyright В© www.kisedona.com 2016-2025