Replacement |
1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”) |
2. |
Disconnect the fuel sender connector (A) and fuel pump connector (B). |
3. |
Remove the cushion pipe fixing clip (A), and then separate the head assembly (B) from reservoir cup. |
4. |
Remove the reservoir cup (B) after releasing the fixing hook (A). |
5. |
Disconnect the ground line (A). |
6. |
Separate the fuel pump motor and filter after remove the fuel pump motor (A). |
7. |
Install in the reverse order of removal. |
TPMS Receiver Repair procedures
Removal
Take care not to scratch the crash pad and related parts.
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to B ...
Headlamp (bulb type) -high/low
1. Open the hood.
2. Remove the front cover(1) and headlamp assembly nuts(2).
3. Remove the headlamp assembly from the body of the vehicle
4. Remove the headlamp bulb cover by turning it counte ...