Inspection |
1. |
Visually check the pipes, hangers and connections for severe corrosion, leaks or damage. |
2. |
Check for unusual exhaust sounds or abnormal exhaust fumes. |
Repair procedures
On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test
1.
Check for DTCs.
•
If a DTC is present, perform troubleshooting in accordanc ...
Sub Frame Repair procedures
Removal
1.
Loosen the bolt (A) and then disconnect the universal joint assembly from the pinion of the steering gear box.
Tightening torque:
32.4 ~ 37.3N.m (3.3 ~ 3.8kgf.m, 23.9 ~ 27.5lb-ft)
...