Connect cables in numerical order and disconnect in reverse order.
Barometric Pressure Sensor (BPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the BPS at idle and IG ON.
Pressure [kPa (kgf/cm², psi)]Output Voltage (V) [Ref=5V]10.0 (0. ...
Oil Pump Description and Operation
Description
•
The oil pump is integrated with 26 brake chamber.
•
Rotation of the pump builds the hydraulic pressure needed for
lubricating various parts of the transaxle and ...