Kia Sedona: To adjust the sensitivity of Smart Cruise Control
The sensitivity of vehicle speed when following the front vehicle to maintain the set distance can be adjusted. Go to the User Settings Mode (Driving Assist) and select SCC (Smart Cruise Control). You may select one of the three stages you prefer.
- Slow:
Vehicle speed following the front vehicle to maintain the set distance is slower than normal speed. - Normal:
Vehicle speed following the front vehicle to maintain the set distance is normal - Fast:
Vehicle speed following the front vehicle to maintain the set distance is faster than normal speed.
✽ NOTICE
The last selected mode is remained in the system
Sensor to detect distance to the vehicle ahead
The sensor detects distance to the vehicle ahead.
If the sensor is covered with dirt or other foreign matter, the vehicle to vehicle
distance control may not operate correctly.
Always keep the s ...
To convert to cruise control mode
The driver may choose to only use the cruise control mode (speed control function)
by doing as follows:
1.Turn the SCC on (the cruise indicator light will be on but the system will
not be act ...
Other Information:
Engine Control Module (ECM) Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery terminal.
2.
Remove the battery.
(Refer to Engine Electrical System - "Battery")
3.
Remove the air cleaner asse ...
Operating precautions for catalytic converters
WARNING - Catalytic converter
Keep away from the catalytic converter and exhaust system while the vehicle
is running or immediately thereafter. The exhaust and catalytic systems are very
hot ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
