If you want to speed up temporarily when the cruise control is on, depress the accelerator pedal. Increased speed will not interfere with cruise control operation or change the set speed.
To return to the set speed, take your foot off the accelerator.
If you move the lever down (to SET-) at increased speed, the cruising speed will be set again.
✽ NOTICE
Be careful when accelerating temporarily, because the speed is not regulated automatically at this time even if there is a vehicle in front of you.
Parking Brake & Brake Fluid Warning Light
This warning light illuminates :
Once you set the ignition switch or Engine Start/Stop Button to the ON position.
- It illuminates for approximately 3 seconds.
- It remains on if the parking ...
Description and Operation
System Configuration
PAS consists of 8 sensors (4 front & 4 rear) that detect
obstacles and transmit the result separately in three warning levels,
the first, second and third to IPM (BCM) ...