The automatic transaxle has 6 forward speeds and one reverse speed. The individual speeds are selected automatically, depending on the position of the shift lever.
✽ NOTICE
The first few shifts on a new vehicle, if the battery has been disconnected, may be somewhat abrupt. This is a normal condition, and the shifting sequence will adjust after shifts are cycled a few times by the TCM (Transaxle Control Module) or PCM (Powertrain Control Module).
For smooth operation, depress the brake pedal and the lock release button when shifting from N (Neutral) to a forward or reverse gear.
WARNING - Automatic transaxle
Before leaving the driver A/C Pressure Transducer Description and Operation Power Sliding Door (PSD) Control Module Repair procedures
Depress the brake pedal and the lock
release button when shifting. (If the shift lock system is not equipped, it is not
necessary to depress the brake pedal. However, it is recommended to depre ...
Automatic transaxle
The indicator in the instrument cluster displays the shift lever position when
the ignition switch is in the ON position.
P (Park)
Always come to a complete stop before shifting into P (Park). Thi ...
Transaxle ranges
Other Information:
Description
The A/C Pressure Transducer (APT) converts the pressure value
of high pressure line into voltage value after measuring it. By
converted voltage value, engine ECU controls the coolin ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the luggage side trim [LH].
(Refer to Body - "Luggage Side Trim")
3.
Disconnect the power sliding door control module co ...