Not illuminated
To start the engine, depress the brake pedal and press the ENGINE START/ STOP button with the shift lever in the P (Park) or the N (Neutral) position. For your safety, start the engine with the shift lever in the P (Park) position.
If you press the ENGINE START/STOP button without depressing the brake pedal for automatic transaxle vehicles, the engine will not start and the ENGINE START/STOP button changes as follow:
OFF ➔ ACC ➔ ON ➔ OFF or ACC
✽ NOTICE
If you leave the ENGINE START/ STOP button in the ACC or ON position for a long time, the battery will discharge.
WARNING - Starting vehicle
Never press the ENGINE START/STOP button while the vehicle is in motion except in an emergency. This would result in loss of directional control and braking function, which could cause an accident.
Water Jacket Seperator Repair procedures
Removal
1.
Remove the LH/RH cylinder head assembly and gasket.
(Refer to Cylinder Head Assembly - "Cylinder Head")
2.
Remove the water jacket seperators (A).
Installation
1.
Install the ...
Transaxle Control Module (TCM) Schematic Diagrams
TCM Connector
TCM terminal function
Connector [A]
PinDescription10CAN (High)27Ignition switch29Sports mode up switch35CAN (Low)44Inhibitor switch signal ''S1''45Inhibitor switch signal ''S2''4 ...