1. Turn the ignition switch to the ON position.
2. Turn the fan speed control knob to the OFF (0) position.
3. Turn the mode selection knob to the defrost position ().
4. Push the air intake control button ()
at least 5 times within 3 seconds.
If the battery has been discharged or disconnected, it resets to the defog logic status.
Engine Mounting Repair procedures
Removal and Installation
Engine Mounting Bracket
1.
Disconnect the battery negative terminal.
2.
Install the jack to the edge of the lower oil pan (A) to support the engine.
&n ...
Side Airbag (SAB) Module Components and Components Location
Components
...