1. Set the fan speed to the highest position.
2. Set the temperature to the extreme hot position.
3. Select the position.
4. The outside (fresh) air and air conditioning will be selected automatically.
If the air conditioning is not selected automatically press the corresponding button manually.
Intake Air Temperature Sensor (IATS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and 4.
4.
Check that the resistance is within the speci ...
Components and Components Location
Component Location
1. Hood switch2. Burglar horn3. BCM & RF receiver4. Key warning switch5. Front door lock actuator & switch6. Rear door lock actuator & switch7. Tail gate actuator & ...