Kia Sedona: Rear Evaporator Core Repair procedures - Rear Heater - Heating,Ventilation And Air Conditioning - Kia Sedona YP Service ManualKia Sedona: Rear Evaporator Core Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Heating,Ventilation And Air Conditioning / Rear Heater / Rear Evaporator Core Repair procedures

Replacement
1.
Remove the rear heater & A/C unit.
(Refer to Rear Heater - "Rear Heater Unit")
2.
Remove the rear heater & A/C lower case after loosening the screws.

3.
Remove the rear refrigerant line clip (A) after loosening the screw.

4.
Remove the rear evaporator core (A).

5.
Install in the reverse order of removal.
Rear Heater Core Repair procedures
Replacement 1. Disconnect the battery negative terminal. 2. When the engine is cool, drain the engine coolant from the radiator. (Refer to Engine Mechanical System - “Coolant”) 3. Rem ...

Rear Blower Motor Repair procedures
Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper oper ...

Other Information:

Glove Box Housing Repair procedures
Replacement     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and ...

CVVT Oil Temperature Sensor (OTS) Repair procedures
Inspection [Resistance Inspection] 1. Turn the ignition switch OFF. 2. Remove the OTS. (Refer to "Removal") 3. After immersing the thermistor of the sensor into engine coolant, measure ...

Categories

Copyright © www.kisedona.com 2016-2026