Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the instrument cluster.
(Refer to Indicators And Gauges - "Instrument Cluster") |
3. |
Loosen the mounting screws from backward of the main crash pad. |
4. |
Remove the SVM unit (B) after disconnecting the connector (A). |
Installation |
1. |
Install the SVM unit and connector. |
2. |
Install the instrument cluster. |
3. |
Connect the negative (-) battery terminal. |
Troubleshooting
TPMS Inspection method
Inspection
Find the inspection number by referring to the table above.
The following content is irrelevant of the inspection procedure.
1.
...
Master Cylinder Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the air cleaner assembly (A).
3.
Disconnect the brake fluid level switch connector (B), and rem ...