Kia Sedona: Personal Lamp Repair procedures - Lighting System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Personal Lamp Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body Electrical System / Lighting System / Personal Lamp Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Detach the personal lamp (A) using a flat-tip screwdriver.

3.
Disconnect the personal lamp connector (A).

Installation
1.
Connect the personal lamp connector.
2.
Install the personal lamp.
3.
Connect the negative (-) battery terminal.
Vanity Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the vanity lamp (A) using a flat-tip screwdriver. 3. Disconnect the vanity lamp connector (A). Installation 1. Conne ...

Overhead Console Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the overhead console lamp (A) after loosening the screws. 3. Disconnect the connector (A) from the overhead console lamp. ...

Other Information:

Description and Operation
Description Block Diagram LDWS is composed of below units NoItemFunctionPosition1LDWS UNIT 1) Lane Departure Warning System (LDWS) : Detects drive lane in front and engages warning function ...

Fluid Repair procedures
Inspection Automatic Transaxle Fluid (ATF) Level Check     When checking the ATF level, be careful not to allow foreign substance (like dust) to enter through the filler ...

Categories


Copyright В© www.kisedona.com 2016-2025