Kia Sedona: IMS Control Switch Components and Components Location

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body Electrical System / IMS (Integrated Memory) / IMS Control Switch Components and Components Location

IMS (Integrated Memory System) module Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver''s seat assembly. (Refer to Body - "Front Seat Assembly") 3. Loosening the IMS unit mounting screws (A). 4 ...

IMS Control Switch Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Install the driver''s door trim. (Refer to Body - "Front Door Trim") 3. Remove the IMS switch (A) after loosening the screws. ...

Other Information:

Blower Resistor (Manual) Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. If the measured resistance is not within specification, the blower resistor must be replaced (after removing the resistor). Repl ...

Compressor Components and Components Location
Components 1. Clutch Bolt2. Limiter Bolt3. Limiter & Hub Assembly4. Snap Ring5. Pulley6. Compressor Assembly ...