Kia Sedona: Fuel Filler Door Open Switch Repair procedures - Fuel Filler Door - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Fuel Filler Door Open Switch Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body Electrical System / Fuel Filler Door / Fuel Filler Door Open Switch Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the fuel filler door open switch (A) after pushing the hooks inside.

Installation
1.
Install the fuel filler door open switch.
2.
Install the crash pad lower panel.
3.
Connect the negative (-) battery terminal.
Inspection
1.
Check the switch for continuity between the No. 1 and No. 6 terminals. If the continuity is not as specified, replace the fuel filler door open switch.

Fuel Filler Door Open Switch Components and Components Location
Components ...

Hands Free System
...

Other Information:

ETC (Electronic Throttle Control) System Troubleshooting
Fail-Safe Mode ItemFail-SafeETC MotorThrottle valve stuck at 7°TPSTPS 1 faultECM looks at TPS2TPS 2 faultECM looks at TPS1TPS 1,2 faultThrottle valve stuck at 7°APSAPS 1 faultECM looks at APS 2 ...

Rail Pressure Sensor (RPS) Repair procedures
Inspection 1. Connect the GDS to the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. Removal 1. Turn the ignition switch OFF and d ...

Categories


Copyright © www.kisedona.com 2016-2025