Kia Sedona: Troubleshooting
Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body Electrical System / Blind Spot Detection System / Troubleshooting
| Troubleshooting |
Examples of False-Alarm Occurrence from system characteristics (not considered as problem)
| – |
Characteristics of EM Wave : EM Waves are reflected against
all materials and especially well against metals. Reflections of EM
Waves varies with the shape of object. (※ EM : Electro Magnetic) |
| – |
Radar Sensor : Radar Sensor sense the car by 24GHz echo signal. |
| – |
Special environment may cause ''False-Alarm'' occurrence due to EM waves. |
Blind Spot Detection Indicator Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the mirror (A) from the mirror holder.
Be careful not to damage the fixing clips (A).
3.
...
Other Information:
Rear Temperature Control Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the temperature control actuator connector.
3.
Verify that the actuator operates to the recirculation position when 12V is connect ...
IMS Control Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Install the driver''s door trim.
(Refer to Body - "Front Door Trim")
3.
Remove the IMS switch (A) after loosening the screws.
...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2025 Owners Manual
- Kia Sedona YP 2014-2025 Service Manual
Copyright © www.kisedona.com 2016-2025