Inspection |
1. |
Remove the antenna jack from the audio unit and antenna. |
2. |
Check for continuity between the center poles of antenna cable. |
3. |
Check for continuity between the outer poles of antenna cable. There should be continuity. |
4. |
If there is no continuity, replace the antenna cable. |
5. |
Check for continuity between the center pole (A) and outer pole (B) of antenna cable. There should be no continuity. |
6. |
If there is continuity, replace the antenna cable. |
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear roof trim.
(Refer to Body - "Roof Trim Assembly") |
3. |
Disconnect the roof antenna connector (A). |
4. |
Remove the roof antenna (A) after loosening a nut (B). |
Installation |
1. |
Install the roof antenna. |
2. |
Connect the roof antenna connectors. |
3. |
Install the roof trim assembly.
|
Air intake control
Type A
The air intake control is used to select the outside (fresh) air position or
recirculated air position.
To change the air intake control position, press the control button.
Recirculated ...
Power Window Motor Schematic Diagrams
Circuit Diagram
...