Kia Sedona: AC Inverter Unit Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body Electrical System / AC Inverter System / AC Inverter Unit Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the rear console assembly. (Refer to Body - "Floor Console Assembly")

3.	Disconnect the AC inverter unit connector (A).

4.	Remove the AC inverter unit (A) after loosening the nuts.

Installation

1.	Install the AC inverter unit.

2.	Connect the AC inverter unit connector.

3.	Install the rear console assmbly.

Connect the negative (-) battery terminal.

•	Before starting repair work, turn off the engine and AC inverter.

•	You may get electrocuted if you work with the AC inverter on.

•	You may get electrocuted if you work on the AC inverter with you hands wet.

AC Inverter Unit Schematic Diagrams

Circuit Diagram ...

AC Inverter Outlet Repair procedures

Removal [Outlet 1 - Console] 1. Disconnect the negative (-) battery terminal. 2. Remove the rear console cover. (Refer to Body - "Rear Console Cover") 3. Remove the floor console tray (A ...

Other Information:

Starter Specifications
Specification Starter ItemSpecificationRated voltage12 V, 1.7 kWThe number of pinion teeth12Performance[No-load, 11.5 V]AmpereMax.85 ASpeedMin. 2,550 rpm ...

Temperature control
The temperature will increase to the maximum (HI) by turning the knob to the extreme right. The temperature will decrease to the minimum (Lo) by turning the knob to the extreme left. When turn ...

Kia Sedona: AC Inverter Unit Repair procedures

AC Inverter Unit Schematic Diagrams

AC Inverter Outlet Repair procedures

Other Information:

Categories